Wet Freezing Thermal Cycle Test Chamber, High and Low Temperature
Simulation Chamber
Overview: Conduct high, low temperature, damp heat cycle change test on
products, materials and parts to evaluate their adaptability for
storage and use under certain temperature and humidity conditions.
Applicable standards: IEC 61215, IEC 61730-2004, IEC 61345 standards.
Thermal cycling test:
Photovoltaic modules at a wind speed of not less than 2m · The S-1
was tested in a space with temperatures ranging from -40°C±2°C to
85°C±2°C
Wet --- cold (freezing) test:
The PV modules are placed in an environmental chamber at room
temperature to complete 10 cycles. The high and low temperatures
should be within ±2°C of the set value, and the relative humidity
should be kept at ±5%R of the set value at each temperature above
room temperature· H or less.
Name:Thermal Cycle/Wet Freezing Tester (Box)
Applicable standards: according to the requirements of IEC61215 and
UL1073 standards
Purpose: The photovoltaic module is to place the module in an
environment with repeated temperature changes of -40°C~85°C, and
determine the performance of the modules in the repeated
temperature change environment.
Technical Specifications:
1. Temperature range: -40~85°C
2. Temperature fluctuation: ≤±1°C
3. Temperature deviation: ≤±1°C
4. Temperature uniformity: ≤±2°C
5. Temperature rise and fall rate: meet the requirements of IEC
61215 standard
6. Humidity range: 30~98%RH,
7. Relative humidity deviation: ±3%FS; Deviation 85±2%RH; 90±2%RH
8. Humidity fluctuation: ±2%RH
9. Humidity uniformity: ≤2%RH
10. In the thermal cycling test, the temperature change rate on the
surface of the module should not be greater than 100°C/h, and the
minimum holding time should be 10 minutes. One trial is 200 or 50
cycles
11. 12 test components can be placed (can be made according to
customer requirements)
12. Inner box size: about 1.5×2.5×1.5m (L*W*H)
13. Outer box size: about 2.5×3.0×2.5m (L*W*H)
14. Inner box material: stainless steel first-class mirror plate
15. Outer box material: stainless steel matte
16. Control system: automatic calculation
17. Display panel: touch screen
18. Real-time curve display: It can display the program setting
time, adjust the curve sampling rate recording cycle, and display
the set value curve and the actual operating value curve
19. Real-time setting display: display the execution program
number, segment, remaining time and cycle times, humidity value,
humidity value
20. Communication interface: RS-485 communication interface, with
online software, it can be connected to the computer, data storage,
printing and downloading
21. Humanized operation interface automatic control: refrigeration
compressor, automatic energy valve, temperature, humidity electric
heating, etc
22. Independent cap control: the program controller will
independently control the
heating/humidification/dehumidification/cooling and other functions
to save energy
23. Display language: Chinese and English can be switched
24. Power-off reset and power-off memory function
25. Internal material: SUS#304 high-temperature resistant
high-tensile stainless steel plate
26. Exterior material: anti-rust steel plate + baking paint
treatment
27. Insulation material: high-density rigid PU foam and glass
insulation wool
28. Refrigerant: Adopt new HFC environmentally friendly refrigerant
29. Refrigerant valve: automatically switch and adjust the
refrigerant valve
30. Power supply: 380V 60HZ.
Welcome to visit our factory for sightseeing!
Packaging & Shipping:
FAQ:
A:We are factory in Dongguan City, Guangdong Province,China.Near
Shenzhen or Guangzhou.Q:Are you factory or trading company?
Q:What kind of certificate you have?
A:ISO9001 Certification, CE Certification.
Q:What is the lead time of the product?
A: Generally 7-15 days after getting the deposit.
Q:How about the payment term?
A: T/T, by cash, western union, or L/C.
Q:How about the warranty term?
A:1 year warranty,The engineer can teach the machine on the spot.
